2024 Gehl Compact Loaders VT320

Information

2024 Gehl Compact Loaders VT320

Are you going up against the most difficult challenges on farms and construction sites and need unmatched performance, strength, and durability? Then you need the VT320, our largest vertical lift Track Loader. A machine that’s tougher than any job you can throw at it, the VT320 features an 85 kW engine and 3,200 lbs. of rated operating capacity for powerful lift and torque. That means rough terrain and unpredictable environments won't stop you while you're lifting, loading, and unloading heavy-duty materials from point A to B. Engineered for superior serviceability, productivity, and comfort, this machine gives you the edge over whatever is coming your way on the job site while leaving you prepared for tomorrow. The VT320—it's the pinnacle of Track Loaders.

Photos

Highlights

  • West Chicago IL,
  • 2024
  • Gehl
  • Compact Loaders VT320
  • Available
  • Track Shoe: 18 in | Bucket: 84 in
  • Height to Hinge Pin – Fully Raised: 130 in | Dump Height - Fully Raised: 100 in | Specified Height: 76 in | Reach at Specified Height: 30 in

    • Specifications

    • 2024
    • Gehl
    • Compact Loaders
    • VT320
    • General
    • Deutz
    • TD 3.6 EPA
    • 85 kW @ 2300 rpm | 114 Hp
    • 0.95 US gal / 4
    • Axial Piston with planetary gear box reduction
    • 12 V
    • Cold Cranking Amps at Temperature (CCA) 1600 A
    • 14 V / 120 A
    • Standard flow - Auxiliary hydraulics: 29 US gpm | High-Flow Auxiliary Hydraulics - Option: 38 US gpm
    • Ground Speed - Single Speed: 5 mph
    • Drawbar Pull/Tractive Effort: 12769 lb
    • Reach - Fully Raised: 40 in | Dump angle at full height: 41 ° | Maximum Rollback Angle - Fully Raised: 90.30 ° | Maximum Rollback Angle at Ground: 31 ° | Carry Position: 8 in | Maximum Rollback Angle at Carry Position: 31 ° | Digging Position: 0.75 in | Angle of Departure with STD Counterweight: 23.50 ° | Track gauge: 52 in | Crawler base: 62 in
    • 169 in | Overall Height to top of ROPS: 83 in
    • Height to Hinge Pin – Fully Raised: 130 in | Dump Height - Fully Raised: 100 in | Specified Height: 76 in | Reach at Specified Height: 30 in
    • with bucket: 160 in | without Bucket: 128 in
    • 12 in | Clearance Radius - Front with Bucket: 98 in | Clearance Circle - Rear: 74 in
    • Track Shoe: 18 in | Bucket: 84 in
    • less bucket: 70 in
    • Operating Capacity at 35% Tipping Load: 3201 lb | Operating Capacity At 50% Tipping Load: 4572 lb | Tipping capacity: 9145 lb
    • 10 US gal
    • 32 US gal
    • Bucket Breakout - Tilt Cylinder: 9903 lb | Bucket Breakout - Lift Cylinder: 7491 lb
    • 11799 lb